Perry Johnson Registrars, Inc | UKASANABITAR
All Categories > Pre-Engineered Journal, Guide, Thrust & Dryer Bearings > Grade 1010 Babbitt Sleeve Bearings & Thrust Washers > METCAR 1010 Babbitt Standard Plain Sleeve Bearings > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

METCAR 1010 Babbitt Standard Plain Sleeve Bearings

Check up to five results to perform an action.


For General Purpose Self-lubricating Applications up to 350°F Operating Temperature (Dry or Submerged)

Metcar 1010 Babbitt is an especially formulated self-lubricating bearing material low in friction, corrosion resistant, extremely durable and can be used for both dry and submerged application. The sizes listed are normally available from stock and have been sized to provide long bearing life under normal load and speed conditions, The dimensions shown will also provide proper bearing press fit in housings and correct shaft running clearance for operating temperatures up to 350°F.

Metcar Bearings can be manufactured in sizes up to 6" diameter shaft. Bearings sized to meet your exact operating conditions are available on short order.
  • Completely self-lubricating
  • Constant and low coefficient of friction
  • Use dry or submerged
  • Outstanding wear resistance
  • No galling or seizing to shaft
  • Dimensionally stable (dry or submerged)
  • Non-contaminating
  • Operates quietly
  • Other sizes available to meet your exact operating requirements
  • Bearing assemblies available (see other pages)
  • High corrosion resistance




Compare Items
   
  Results 1 - 30 of 30 1 

Item #

Shaft Size

Housing ID

OD

ID

Length

C-110 1/8 " .374/.375 " .377/.378 " .130/.132 " 1/4 "
C-111 3/16 " .4365/.4375 " .439/.440 " .192/.194 " 1/4 "
C-112 1/4 " .499/.500 " .502/.503 " .255/.257 " 5/16 "
C-113 5/16 " .5615/.5625 " .5645/.5665 " .318/.320 " 3/8 "
C-114 3/8 " .624/.625 " .627/.629 " .381/.383 " 3/8 "
C-115 7/16 " .686/.687 " .689/.691 " .443/.445 " 1/2 "
C-116 1/2 " .874/.875 " .877/.879 " .507/.509 " 5/8 "
C-117 9/16 " .936/.937 " .939/.941 " .569/.571 " 5/8 "
C-118 5/8 " .999/1.000 " 1.002/1.004 " .632/.634 " 7/8 "
C-119 11/16 " 1.060/1.062 " 1.064/1.066 " .695/.697 " 1 "
C-120 3/4 " 1.123/1.125 " 1.127/1.129 " .758/.760 " 1-1/4 "
C-121 13/16 " 1.185/1.187 " 1.189/1.191 " .820/.822 " 1-1/4 "
C-122 7/8 " 1.248/1.250 " 1.252/1.254 " .883/.885 " 1-3/8 "
C-123 15/16 " 1.310/1.312 " 1 314/1.316 " .945/.947 " 1-3/8 "
C-124 1 " 1.373/1.375 " 1.377/1.379 " 1.008/1.010 " 1-1/2 "
C-125 1-1/8 " 1.623/1.625 " 1.627/1.629 " 1.134/1.136 " 1-3/4 "
C-126 1-3/16 " 1.685/1.687 " 1.689/1.691 " 1.196/1.198 " 1-7/8 "
C-127 1-1/4 " 1.748/1.750 " 1.752/1.754 " 1.259/1.261 " 1-7/8 "
C-128 1-3/8 " 1.873/1.875 " 1.877/1.879 " 1.384/1.386 " 2 "
C-129 1-7/16 " 1.935/1.937 " 1.939/1.941 " 1.446/1.448 " 2-1/4 "
C-130 1-1/2 " 1.998/2.000 " 2.002/2.004 " 1.509/1.511 " 2-1/4 "
C-131 1-5/8 " 2.123/2.125 " 2.127/2.129 " 1.634/1.636 " 2-1/2 "
C-132 1-11/16 " 2.185/2.187 " 2.189/2.191 " 1.696/1.698 " 2-5/8 "
C-133 1-3/4 " 2.248/2.250 " 2.253/2.255 " 1.761/1.763 " 2-5/8 "
C-134 1-7/8 " 2.373/2.375 " 2.378/2.380 " 1.886/1.888 " 2-3/4 "
C-135 1-15/16 " 2.560/2.562 " 2.565/2.567 " 1.948/1.950 " 3 "
C-136 2 " 2.623/2.625 " 2.628/2.630 " 2.011/2.013 " 3 "
C-137 2-1/8 " 2.748/2.750 " 2.753/2.755 " 2.136/2.138 " 3-1/4 "
C-138 2-3/16 " 2.810/2.812 " 2.815/2.817 " 2.198/2.200 " 3-1/4 "
C-139 2-1/4 " 2.998/3 000 " 3.004/3.006 " 2.262/2.264 " 3-1/2 "
  Results 1 - 30 of 30 1 
Site created by Thomas Web Solutions and powered by Navigator Platform