Perry Johnson Registrars, Inc | UKASANABITAR
All Categories > Pre-Engineered Journal, Guide, Thrust & Dryer Bearings > Grade 2500 High Temperature Sleeve Bearings & Thrust Washers > METCAR 2500 High Temperature Sleeve Bearings > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

METCAR 2500 High Temperature Sleeve Bearings

Check up to five results to perform an action.


For General Purpose High Temperature Applications in the 700-1000ºF Range

Metcar 2500 High Temperature Bearings and Thrust Washers were especially developed for High Temperature applications (700-1000ºF) where normal self-lubricating bearings fail. At temperatures above 600ºF the rate of attack by oxygen increases rapidly with increasing temperature. Treatments have been developed by Metallized Carbon Corporation, which greatly increases the oxidation resistance of this grade without hindering its inherent self-lubricating properties. As a result Metcar 2500 can be safely used up to 1000ºF. The sizes listed are normally available from stock and have been sized to provide long wear life under heavy loading and moderate speeds.

All Bearing Assemblies can be fitted with Metcar2500.
  • Operate without lubrication up to 1000ºF.
  • Long life
  • Low and constant coefficient of friction
  • Quiet running
  • Maintenance free
  • Available in all Type Bearing Assemblies



Compare Items
   
  Results 1 - 24 of 24 1 

Item #

Shaft Size

Housing Size

OD

ID

Length

C-610 1 " 1.498/1.500 " 1.508/1.510 " 1.015/1.017 " 2 "
C-611 1-1/8 " 1.748/1.750 " 1.759/1.761 " 1.141/1.143 " 2-1/4 "
C-612 1-3/16 " 1.748/1.750 " 1.759/1.761 " 1.203/1.205 " 2-3/8 "
C-613 1-1/4 " 1.873/1.875 " 1.885/1.887 " 1.267/1.269 " 2-1/2 "
C-614 1-3/8 " 1.998/2.000 " 2.010/2.012 " 1.392/1.394 " 2-3/4 "
C-615 1-7/16 " 2.248/2.250 " 2.261/2.263 " 1.455/1.457 " 3 "
C-616 1-1/2 " 2.248/2.250 " 2.261/2.263 " 1.518/1.520 " 3-1/2 "
C-617 1-5/8 " 2.373/2.375 " 2.387/2.389 " 1.644/1.646 " 4 "
C 618 1-11/16 " 2.498/2.500 " 2.512/2.514 " 1.706/1.703 " 4-1/2 "
C 619 1-3/4 " 2.498/2.500 " 2.512/2.514 " 1.769/1.771 " 4-1/2 "
C-620 1-7/8 " 2.748/2.750 " 2.764/2.766 " 1.896/1.898 " 4-3/4 "
C-621 1-15/16 " 2.748/2.750 " 2.764/2.766 " 1.958/1.960 " 5 "
C-622 2 " 2.748/2.750 " 2.764/2.766 " 2.021/2.023 " 5 "
C-623 2-1/8 " 2.998/3.000 " 3.015/3.017 " 2.148/2.150 " 5-1/4 "
C-624 2-3/16 " 2.998/3.000 " 3.015/3.017 " 2.210/2.212 " 5-1/2 "
C-625 2-1/4 " 2.998/3.000 " 3.015/3.017 " 2.273/2.275 " 5-1/2 "
C-626 2-7/16 " 3.498/3.500 " 3.517/3.519 " 2.462/2.464 " 6 "
C-627 2-1/2 " 3.498/3.500 " 3.517/3.519 " 2.525/2.527 " 6 "
C-628 2-3/4 " 3.748/3.750 " 3.768/3.770 " 2.776/2.778 " 6-1/2 "
C-629 2-15/16 " 4.248/4.250 " 4.270/4.272 " 2.965/2.967 " 7 "
C-630 3 " 4.248/4.250 " 4.270/4.272 " 3.028/3.030 " 7 "
C-631 3-1/4 " 4.498/4.500 " 4.521/4.523 " 3.279/3.261 " 7 "
C-632 3-7/16 " 4.748/4.750 " 4.772/4.774 " 3.467/3.469 " 7-1/2 "
C-633 3-1/2 " 4.748/4.750 " 4.772/4.774 " 3.530/3.532 " 7-1/2 "
  Results 1 - 24 of 24 1 
Site created by Thomas Web Solutions and powered by Navigator Platform