Perry Johnson Registrars, Inc | UKASANABITAR
All Categories > Pre-Engineered Journal, Guide, Thrust & Dryer Bearings > Grade 9800 High Temperature Sleeve Bearings & Thrust Washers > METCAR 9800 High Temperature Sleeve Bearings > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

METCAR 9800 High Temperature Sleeve Bearings

Check up to five results to perform an action.


For General Self-lubricating Applications up to 1100º F. Operating Temperature

Metcar 9800 high temperature is the result of experience in the High Temperature Bearing field plus a recent development of an oxidation treatment which greatly increases the oxidation resistance of mechanical graphite.

Metcar 9800 is completely self-lubricating and has been operated successfully to temperatures of 1100º F. Ideally suited as a bearing or thrust washer for extreme temperature installations such as Furnaces, Lehrs, Dryers, Ovens and others where 1000º F. plus temperatures are required. The sizes listed are conservatively rated and normally available from stock. When considering the use of this special high temperature grade it is recommended you fill out and return the enclosed inquiry sheet to insure the bearing and or washer size you have selected is adequate to meet your particular operating requirements.
  • Operating without lubrication up to 1100º F.
  • Low and constant coefficient of friction
  • Good wear life



Compare Items
   
  Results 1 - 19 of 19 1 

Item #

Shaft Size

Housing Size

OD

ID

Length

C-810 1 " 1.498/1.500 " 1.511/1.513 " 1.018/1.020 " 2 "
C-811 1-1/8 " 1.748/1.750 " 1.763/1.765 " 1.145/1.147 " 2-1/4 "
C-812 1-3/16 " 1.748/1.750 " 1.763/1.765 " 1.207/1.209 " 2-3/8 "
C-813 1-1/4 " 1.873/1.875 " 1.838/1.890 " 1.270/1.272 " 2-1/2 "
C-814 1-3/8 " 1.998/2.000 " 2.014/2.016 " 1.396/1.398 " 2-3/4 "
C-815 1-7/16 " 2.248/2.250 " 2.265/2.267 " 1.459/1.461 " 3 "
C-816 1-1/2 " 2.248/2.250 " 2.265/2.267 " 1.523/1.525 " 3-1/2 "
C-817 1-5/8 " 2.373/2.375 " 2.391/2.393 " 1.649/1.651 " 4 "
C-818 1-11/16 " 2.498/2.500 " 2.518/2.520 " 1.713/1.715 " 4-1/2 "
C-819 1-3/4 " 2.498/2.500 " 2.518/2.520 " 1.776/1.778 " 4-1/2 "
C-820 1-7/8 " 2.748/2.750 " 2.770/2.772 " 1.903/1.905 " 4-3/4 "
C-821 1-15/16 " 2.748/2.750 " 2.770/2.772 " 1.965/1.967 " 5 "
C-822 2 " 2.748/2.750 " 2.770/2.772 " 2.028/2.030 " 5 "
C-823 2-1/8 " 2.998/3.000 " 3.021/3.023 " 2.154/2.156 " 5-1/4 "
C-824 2-3/16 " 2.998/3.000 " 3.021/3.023 " 2.216/2.218 " 5-1/2 "
C-825 2-1/4 " 2.998/3.000 " 3.021/3.023 " 2.279/2.281 " 5-1/2 "
C-826 2-7/16 " 3.498/3.500 " 3.524/3.526 " 2.469/2.471 " 6 "
C-827 2-1/2 " 3.498/3.500 " 3.524/3.526 " 2.532/2.534 " 6 "
C-828 2-3/4 " 3.748/3.750 " 3.776/3.778 " 2.784/2.786 " 7-1/2 "
  Results 1 - 19 of 19 1 
Site created by Thomas Web Solutions and powered by Navigator Platform