Perry Johnson Registrars, Inc | UKASANABITAR
All Categories > Pre-Engineered Journal, Guide, Thrust & Dryer Bearings > Dryer Bearings > 200 Series Dryer Bearings > Customize a 200 Series Dryer Bearing Assembly  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Customize a 200 Series Dryer Bearing Assembly



Type 200 Series Bearing Assemblies, like the 100 Type Assemblies, were originally designed for roller conveyor dryers and ovens. Since that time new uses as bearing assemblies on numerous types of industrial process equipment have been found. By providing solid lubricant bearings, a self-aligning feature, and easy serviceability, these assemblies are a smart choice.

The split-bearing cartridge provides a method for rapid bearing replacement. No tools are necessary and the cartridge can be serviced without removing the surrounding components.

Special features:
  • Supplied in all Metcar® bearing grades
  • Solid, self-lubricating and maintenance free
  • Self-aligning (compensate for shaft deflection and misalignment)
  • Operate freely and quietly
  • Operate dry or submerged
  • Bearing cartridges available in solid or split design
  • Standard bearing lengths: 1 ¾", 2", 2 ½"
  • Bearing ends can be used for thrust loading
  • Bearings can be rotated 180° for double life
  • Available for shafts to 1 ¾"
  • Standard bore sizes are 1-1/4 and 1-1/2
How To Order

When ordering a Type 200 Series Bearing Assembly, the following information is needed to determine the correct assembly for your application:
  1. Choose a hanger frame suitable for your application. 200 Series assemblies are symetrical so the direction of rotation does not need to be specified.
  2. Choose a bearing style - keep in mind that the 200 series bearing cartridges will only fit in the 200 Series Hanger Frames. Solid bearing cartridges of the same design are less expensive than split cartridges. Specify the length, 1 ¾", 2", or 2 ½".
  3. Choose a grade - if you do not know the applicable grade, a grade can be determined based on the maximum temperature and other operating conditions of the application.
  4. Specify the bore size or shaft size required for the application.
  5. A 200-CL Clip Spring is necessary for each assembly to hold the bearing cartridge in place.

Click Here to Customize a 200 Series Dryer Bearing Assembly



Site created by Thomas Web Solutions and powered by Navigator Platform