Perry Johnson Registrars, Inc | UKASANABITAR
All Categories > Pre-Engineered Journal, Guide, Thrust & Dryer Bearings > Dryer Bearings > 100 Series Dryer Bearings > Customize a 100 Series Dryer Bearing Assembly  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Customize a 100 Series Dryer Bearing Assembly



Metcar® Type 100 Series Bearing Assemblies have been designed and patented primarily for use in the dryers of the gypsum wallboard and plywood industries. Since their introduction nearly 50 years ago, these assemblies have been extensively employed as bearing members for hundreds of different high temperature continuous dryer and industrial conveyor applications.

With more than a dozen different frame designs, a bearing assembly can be constructed to fit almost any OEM or customized board dryer or conveyor. When the choice of frames is combined with the wide array of bearing cartridge designs, literally dozens of combinations are possible.

Metcar® Type 100 Series assemblies have gained wide popularity for use in many industrial conveyor and material handling applications. Our technical and sales staff will gladly assist you in choosing the design and material that is right for your application.

Special Features:
  • Supplied in all Metcar® bearing grades
  • Self-lubricating and maintenance free
  • Many assemblies available in stainless steel
  • All assemblies automatically compensate for shaft deflection and misalignment due to temperature change or movement of dryer or conveyor
  • Operate dry or submerged
  • All Metcar® type 100 bearing cartridges fit any 100 series frame
  • Bearings can be rotated 180° for increased life
  • Cost effective, compact design
  • Bore sizes available up to 1-7/16"
  • Standard stock bore sizes are 30mm and 1-1/4"
How To Order

When ordering a Type 100 Series Bearing Assembly, the following information is needed to determine the correct assembly for your application:
  1. Choose a hanger frame suitable for your application. Include with this, the direction of rotation of shaft as viewed from the end of the shaft closest to the assembly.
  2. Choose a bearing cartridge - keep in mind that the 100 series bearing cartridges will only fit in the 100 Series Hanger Frames. Solid bearing cartridges of the same design are less expensive than the hinged split cartridges.
  3. Choose a grade - if you do not know the applicable grade, a grade can be determined based on the maximum temperature and other operating conditions of the application
  4. Specify the bore size or shaft size required for the application
  5. An S-100 Clip Lock is necessary for each assembly to hold the bearing cartridge in place.

Click Here to Customize a 100 Series Dryer Bearing Assembly



Site created by Thomas Web Solutions and powered by Navigator Platform